Specifications
ELECTRICAL
At Ta=25°C, Vs=±15 V λ=650 nm, internal 1MΩ feedback resistor, unless otherwise noted.
					OPT301M
PARAMETER			CONDITIONS					UNITS
					MIN	TYP	MAX
RESPONSIVITY
Photodiode Current			650nm			0.47		A/W
Voltage Output			850nm			0.47		V/µW
vs Temperature						200		ppm/°C
Unit-to-unit Variation			650nm			±5		%
Nonlinearity			FS Output=10V			0.01		% of FS
Photodiode area			(2.29 x 2.29nm)			5.2		mm²
DARK ERRORS, RTO(²)
Offset Voltage Output						±0.5	±2	mV
vs Temperature						±10		µV/°C
vs Power Supply			vs=±2.25V to ±18V			10	100	µV/V
Voltage Noise			measured BW=0.1 to 100Khz			160		µVrms
RESISTOR 1MΩ Internal
Resistance						1		MΩ
Tolerance						±0.5	±2	%
vs Temperature						50		ppm/°C
FREQUENCY RESPONSE
Bandwith, Large or Small-Signal, -3dB						4		Khz
Rise Time, 10% to 90%						90		µs
Settling Time, 1%			FS to Dark			240		µs
	0.1%		FS to Dark			350		µs
	0.01%		FS to Dark			900		µs
Overload Recovery Time			100% overdrive, Vs=±15V			240		µs
			100% overdrive, Vs=±5V			500		µs
			100% overdrive, Vs=±2.25V			1000		µs
OUTPUT
Voltage Output			Rl=10KΩ		(V+) - 1.25	(V+) - 0.65		V
			Rl=5KΩ		(V+) - 2	(V+) - 1		V
Capacitive Load, Stable Operation						10		nF
Short-Circuit Current						±18		mA
POWER SUPPLY
Specified Operating Voltage						±15		V
Operating Voltage Range					±2.25		±18	V
Quiescent Current			Io=0			±0.4	±0.5	mA
TEMPERATURE RANGE
Specification					-40		85	°C
Operating/Storage					-55		125	°C
Thermal Resistance, Θja						200		°C/W
PHOTODIODE SPECIFICATIONS
At Ta=±25°C, unless otherwise noted.
					Photodiode of OPT301
PARAMETER			CONDITIONS					UNITS
					MIN	TYP	MAX
Photodiode Area			(2,29 x 2,29 mm)			5,1		mm²
Current Responsivity			650nm			0,47		A/W
Dark Current			Vd=0 V			500		fA
vs Temperature					doubles every 10°C
Capacitance			Vd=0 V			4000		pF
Electrical
					Op Amp Section of OPT301
At Ta=±25°C, Vs=±15V, unless otherwise noted.
					OPT301 Op Amp
PARAMETER			CONDITIONS					UNITS
					MIN	TYP	MAX
INPUT
Offset Voltage						±0.5		mV
vs Temperature						±5		µV/°C
vs Power Supply			Vs=±2.25V to ±18V			10		µV/V
Input Bias Current						1		pA
vs Temperature					doubles every 10°C
NOISE
Input Voltage Noise
Voltage Noise Density, f=10Hz						30		nV/√(Hz)
	f=100Hz					25		nV/√(Hz)
	f=1kHz					15		nV/√(Hz)
Current Noise Density, f=1kHz						0.8		fA/√(Hz)
INPUT VOLTAGE RANGE
Common-Mode Input Range						±14.4		V
Common-Mode Rejection						106		dB
INPUT IMPEDANCE
Differential						10^12ll3		ΩllpF
Common-Mode						10^12ll3		ΩllpF
OPEN-LOOP GAIN
Open-Loop Voltage Gain						120		dB
FREQUENCY RESPONSE
Gain-Bandwidth Product						380		kHz
Slew Rate						0.5		V/µs
Settling Time 0.1%						4		µs
	0.01%					5		µs
OUTPUT
Voltage output			Rl=10kΩ		(V+) - 1.25	(V+) - 0.65		V
Short-Circuit Current			Rl=5kΩ		(V+) - 2	(V+) - 1		V
Short-Circuit Current						±18		mA
POWER SUPPLY
Specified Operating Voltage						±15		V
Operating Voltage Range					±2.25		±18	V
Quiescent Current			Io=0			±0.4	±0.5	mA